A name that has made the history

RACER, WINNING GENERATION

The 401S is the extreme evolution of the Tony Kart Racer. Born in 2000, through its several editions over the years, it has been able to collect 7 World Championships and many international titles. What are the developments on the 401S? A reduction of the total weight, several details (the new floor plate, the sprocket’s hub with two screws, the steering column support, the front bumper connection) and a renewed rear brake caliper for the single speed version. What does not change? The philosophy behind the project based on the use of high quality raw materials and sophisticated machinery, which eliminate the possibility of error; the constant, continuous, ceaseless development given by the information gathered in dozens of international competitions faced by the Tony Kart Racing Team.

BSD brake caliper

OK BRAKING

For the single speed categories (OK, OK-Junior and alike) the Racer 401S proposes the new BSD rear brake caliper. Forged in one-piece and with 2 pistons of Ø 34.5 mm, with stroke recovery, combined with the evolution type brake tubes and DOT 5.1, it is the result of a development carried out on the most prestigious and demanding tracks. Extreme conditions overcame in a win, that give Tony Kart drivers a smarter and more adjustable braking system, thanks to the renewed brake caliper, more tough and stable in performance. All this is linked with the usual business approach of OTK Kart Group that involves the use of only selected materials and tested to ensure maximum performance in the most extreme conditions of use.

M6 fairings

DESIGNED BY THE WIND

In karting fractions of seconds are very important. This is the reason why Tony Kart, thanks to OTK Kart Group R&D department, has decided to explore, with a scientific approach, a field which is still known a little to karting: aerodynamics. And so, thanks to intense wind tunnel testing, the OTK M6 fairings are born (CIK-FIA 2015-2020 homologated), able to increase aerodynamics and to convey the air flow in the most appropriate and functional areas. Nevertheless, these studies, have indelibly marked also the graphic design of the top-range Tony Kart chassis, now a real symbol able to make their mark in the circuits all over the world.

Reserved to KZ category

WINNING PACKAGE

KZ version of the Racer 401S inherits from OK version all the main technical features. It stands out, though, for some details that have allowed the Racer to gain several KZ titles. This was possible thanks to a specific technical package which provides a dedicated frame design, further renewed with the introduction of the 401S, as well as a next-generation braking system, the BSS. The latter is featured by one-piece brake calipers with a 4-piston of Ø 22 mm operating system with stroke recovery. For maximum response and braking control.

News in details
  KZ   OK
1 Clutch lever 1 BSD rear brake caliper
2 New floor plate 2 New floor plate
3 Chain guard support 3 One-piece chain guard support
4 Sprocket’s hub with two screws 4 Forged center flange
5 Water pump support 5 Throttle adjustment
6 Seat support 6 Sprocket’s hub with two screws
7 Steering column support 7 Water pump support
8 Front bumper support 8 Seat support
    9 Steering column support
    10 Front bumper support
Technical Fiche
  OK KZ DD2
FRAME MATERIAL Molybdenum chrome steel Molybdenum chrome steel Molybdenum chrome steel
TUBES Ø 30 mm 30 mm 30 mm
WHEELBASE 1045 mm 1045 mm 1045 mm
AXLE Ø 50 mm with CIK-FIA stamp 50 mm with CIK-FIA stamp 40 mm
BRAKING SYSTEM BSD with stub axles evolution type and DOT 5.1 lubricant

SA2 - SA3 with brake hoses evolution type and DOT 5.1 lubricant
BSS with stub axles evolution type and DOT 5.1 lubricant BSS with stub axles evolution type and DOT 5.1 lubricant
INCLUDED ACCESSORIES Magnesium components, MXJ wheels, new exhaust supports, front and rear torsion bars, standard aluminium pedals Magnesium components, MXJ wheels, new exhaust supports, front and rear torsion bars, standard aluminium pedals Magnesium components, MXJ wheels, new exhaust supports, front and rear torsion bars, standard aluminium pedals
BODYWORKS M6 fairings with optional CIK-FIA homologated front spoiler connections – stickers kit with new graphics M6 fairings with optional CIK-FIA homologated front spoiler connections – stickers kit with new graphics M6 fairings with optional CIK-FIA homologated front spoiler connections – stickers kit with new graphics

Axle

Reserved to OK and KZ types. 40 mm for the DD2 version

Tubes Diameter

Single tube of equal diameter both for side and cross pieces

WHEELBASE

Able to allow the best handling on all tracks


Download Fiche